Your shopping cart is empty!
Tags: WAC-99-220kg
WAC-99 is a highly Concentrated multipurpose Latex Emulsion based liquid modifier useful as an additive for concrete mortars in repair/Water proofing application as well as protective coating to cementious substances.
Multiple Advantages :
· Produces high compressive flexural and tensile strength for durable repairs.
· White brushable liquid.
· Useful as bonding agent for old and new concrete.
· Useful as an additive to water proofing mortars/concrete.
· Excellent as a protective coat cementitous substances.
· Antimicrobial prevent fungal & bacterial growth economical in application.
· Excellent barrier to carbon dioxide , chloride, sulphate & nitrates icons, for carbonation resistance coating for protection of concrete subject to adverse climatic condition .
· Highly elastomeric and crack bridging characteristics.
· Prevent corrosion
· Very low water absorption.
Application procedure:
· Surface for treatment must be thoroughly cleaned of all laitance, loose materials, oils , greases etc.
· Mix WAC-99 water and cement thoroughly in 1:1:3 proportion in weight.
· Pre wet the surface before application
· Apply 1st coat allow it to dry for 30 minutes
· Apply second coat and allow it to dry.
· If required overlay concrete screed/mortar when 2nd coat is tacky
· Cure the screed/mortar for minimum 3 days.
Area of application (External coating):
· Bridges, decks, parking areas in highways
· Reinforcement steel to prevent corrosion.
· Stepping terraces and flat roofs.
· Repairs of worn, damaged & spoiled concrete.
· F o r injection, pressure & precision grouting.
· Kitchen bathrooms, side walls swimming pools, safety Tanks etc.
At the time of construction :
When used as an admixture with cement concrete mortar it works as a hardner, wetting and finishing agent. For fast setting is recommended in cement concrete mixture @ 100 gms. to 500 gms. Per bag of cement (50 Kg.) when used with cement curing is must as per norms.
At the time of Painting:
With water based paints (synthetic & acrylic) it can be used to enhance life and brightness.
· 20 % WAC-99 for exterior (4 kg. in 20 kg of any water base paint)
· 10 % WAC-99 for interior (2 kg. in 20 kg. of any water base paint)
Technical View:
Appearance : milky white
Base : modified polymer
State : liquid Emulsion
pH : 8 to 9
Solid Content : 50 + 2 %
Coverage : 60-70 sq.ft/kg (Depends on surface)
specific Gravity : 1.1
Pot-Life @30°C : 30 min
Application : Above 10°C & below 45°C Temp.
Depth of : (Accelerated carbonation Test)
2 hours :Nil
4 hours : Nil
Thickness : 1-5 mm
Precaution & Limitations :
Container should be tightly closed after application. Clean tools with water.
Note : Above information’s are given in good faith, ICO Ltd. are not responsible for any misuse, mishandling & claims.
Disclaimer :
The product information & application details has been given in good faith and as a general guideline. The company does not assume liability for unsatisfactory results and damage.
Available Packings
100 g., 500 g.,1 kg., 5 kg., 10 kg., 20 kg., 50 kg., 220 kg.
Write a review