Your shopping cart is empty!
WAC-99-1kg is a highly
Concentrated multipurpose Latex Emulsion based liquid modifier useful as an
additive for concrete mortars in repair/Water proofing application as well as
protective coating to cementious substances.
Multiple Advantages :
Produces high compressive
flexural and tensile strength for durable repairs.
White brushable liquid.
Useful as bonding agent for old and new concrete.
Useful as an additive to water
Excellent as a protective
coat cementitous substances.
Antimicrobial prevent fungal
& bacterial growth economical in application.
· Excellent barrier to carbon
dioxide , chloride, sulphate & nitrates icons, for carbonation resistance
coating for protection of concrete subject to adverse climatic condition .
Highly elastomeric and crack
Very low water absorption.
Surface for treatment must be
thoroughly cleaned of all laitance, loose materials, oils , greases etc.
Mix WAC-99 water and cement thoroughly
in 1:1:3 proportion in weight.
Pre wet the surface before
Apply 1st coat allow
it to dry for 30 minutes
Apply second coat and allow it to
If required overlay concrete
screed/mortar when 2nd coat is tacky
Cure the screed/mortar for
minimum 3 days.
application (External coating):
Bridges, decks, parking areas in
Reinforcement steel to prevent
Stepping terraces and flat roofs.
Repairs of worn, damaged & spoiled concrete.
F o r injection, pressure & precision
Kitchen bathrooms, side walls swimming pools, safety
At the time of construction :
When used as an admixture with cement concrete mortar it
works as a hardner, wetting and finishing agent. For fast setting is recommended
in cement concrete mixture @ 100 gms. to 500 gms. Per bag of cement (50 Kg.)
when used with cement curing is must as per norms.
At the time of Painting:
With water based paints (synthetic & acrylic) it can
be used to enhance life and brightness.
20 % WAC-99 for exterior (4 kg.
in 20 kg of any water base paint)
10 % WAC-99 for interior (2 kg.
in 20 kg. of any water base paint)
: modified polymer
: liquid Emulsion
pH : 8 to 9
: 50 + 2 %
: 60-70 sq.ft/kg (Depends on surface)
specific Gravity : 1.1
Pot-Life @30°C : 30 min
Above 10°C & below 45°C
Depth of :
(Accelerated carbonation Test)
hours : Nil
: 1-5 mm
Precaution & Limitations :
Container should be tightly
closed after application. Clean tools with water.
Note : Above information’s
are given in good faith, ICO Ltd. are not responsible for any misuse,
mishandling & claims.
The product information
& application details has been given in good faith and as a general
guideline. The company does not assume liability for unsatisfactory results and
g., 500 g.,1 kg., 5 kg., 10 kg., 20 kg., 50 kg., 220 kg.
Write a review