Your shopping cart is empty!
DIRECTION FOR USE:
1) Clean and dry the joint surface thoroughly and frost free.
Any expansion joint filler must be checked to ensure that it is lightly packed
and no gaps or voids rusts at the base of the scaling
Use land breaking tape where ever required.
4) Insert backup material
to the required depth.
Apply two coats of suitable primer on the joint surface.
Mix base and accelerator (Curing agent) using a slow speed drill for 5 minutes.
Load sealant into the gun and shall be applied to the joint.
Tool the joint immediately to remove air
bubble & fill the joint completely.
Keep the width : depth ratio as 2 : 1 for sealant.
contraction and construction joints.
retaining structure joint. Joints in walkways, subways, basements, floors and
TEHNICAL DATA :
Form : Two part components
Base : Curing agent, Paste
Colour (Mixed material) : Gray
Storage life : 12 months in dry conditions within range 5C to 35C
Flash Paint : Over 65C
Solid contents : 100%
Density curing chemical : 1.60 – 1.65 kgs./lit.
The product information & application details has been given in good
faith and as a general guideline. The company does not assume any liability for
unsatisfactory results and damage
Write a review